One Stroke Inks logo.

CALL TOLL FREE: 800-942-4447 - CALL LOCAL: 502-366-1070

ELT Series ink icon.

ELT Reducer:  This potent reducer formulated specifically for ELT and ELT-S Series of inks will keep the low temperature properties in tact when added.  Very little ELT Reducer is necessary to lower the viscosity of a thick/old ink.  An ounce will rejuvenate an entire gallon of ink.  Since so little reducer is required, the bleed resistance and opacity is protected.

ELT Series ink icon.

ELT S-Additive:  This is a great additive to make your ink softer and more stretchable.  It was designed for our ELT Series but will work with any plastisol ink.  Simply add 10% or 1 pound per gallon.  This will not reduce the viscosity of most plastisol inks.

ELT Series ink icon.

ELT Stretch Underbase:  This clear underbase will provide numerous benefits to your print.  First, this is a low temperature ink capable of curing as low as 270ºF.  It is also acceptable at 320ºF for regular plastisol inks.  Second, this underbase will make your prints feel softer and more stretchy.  Finally, this ink will allow inks to adhere and be durable on tightly woven 100% nylon and nylon/stretch blends.

 

Best Features:

 

* Impressive stretch when printed under ELT Series.  Improves stretch under other plastisol inks.

* Provides a very soft hand feel.

* Improves adhesion and durability with difficult nylon fabrics.

ELT Series ink icon.

ELT Thickening Powder:  A simple powder to stir into low temperature inks which will not affect the cure time or temperature for the sole purpose of thickening the ink.  This is great for thin inks needing to print through a coarse mesh count.

ELT Series ink icon.

ELT WOW Additive:  Universal inks and athletic inks are typically not very good for wet-on-wet printing.  ELT Series and ELT-S Series are no different.  However, if you add ELT WOW Additive the print will "wick" into cotton and cotton blend tees and sweats for high speed printing without the ink build up.